Clicky

  Loading... Please wait...

Categories

Categories

Recently Viewed

  • WH-100 Basic Whole House Water Filter

PurHome WH 100

RRP:
$449.00
Your Price:
$399.00 (You save $50.00)
SKU:
PurHome WH-100
Brand:
Weight:
16.00 LBS
Rating:
Quantity:


Product Description

 

The PurHome WH-100

 Highlights 6-month-satisfaction-guaran.gif

  • Affordably Priced Whole Home Filtration
  • Filters Chlorine and VOCs down to .5 Micron
  • Washable 5 Micron Sediment Filter

 

The PurHome WH-100 is a low cost whole house filtration system to remove sediments, chlorine and chemical contaminants.

The PurHome WH-100 whole house water treatment system features a washable, pleated 5 micron sediment filter with a clear housing for easy viewing. Filter cartridge may be cleaned and re-used several times before needing replacement. It filters sand, sediment, silt and other suspended matter in water.

In the second stage, water passes through a 10 micron 20" long carbon block cartridge specifically designed to remove chlorine over 99%, chemical contaminants (VOCs) and cancerous chlorine by-products like THMs, odors and more. A 0.5 micron carbon block cartridge is an additional option which will also remove cysts such as cryptosporidium and giardia. The carbon cartridge is recommended to be replaced on average every 6 months.

Installation is fast and easy for anyone with a limited plumbing knowledge.

Need help choosing the right whole house filtration system for your situation?   Get Your Custom Recommendation Now. 

 

PurHome WH-100 Features:

* Affordably Priced Whole House Filtration System
 
* Filters Chlorine and VOCs down to .5 Micron
   
* Washable 5 Micron Sediment Filter

 

FAQ's:

How is the WH-100 Whole House Water Treatment System Installed? 

INSTALLATION INSTRUCTIONS: WH-100 WHOLE HOUSE WATER FILTER

Check to be sure that all materials are enclosed:

Two brackets w/screws
One 10" Clear Filter Housing
One 20" Blue Filter Housing
One 10" Sediment filter, pleated
One 20" Carbon filter w/ mesh cover
Two Sump Wrenches
One 6" Pipe Nipple

Mount the brackets onto each filter housing, connect the two housings together with the provided pipe nipple and some Teflon tape, and then mount to the wall. Your filter system has 3/4" FPT fittings. Two connection options can be used on copper pipe: 3/4" MPT to sweat (be sure to keep the heat away from the plastic), or 3/4" MPT to compression. 3/4" copper flex tubing (used on water heaters) can also be used. Use Teflon tape only on fittings, and on the PVC pipe nipple to connect the two units.

Be sure to note inlet and outlet markings on the unit. As you look at the front of the system, the inlet is on the left. It is recommended that a three-valve by-pass valve be installed to loop the entire system. This enables bypassing the water for lawn watering and makes servicing easier. A shut-off valve may also be installed in front of the system to make filter change outs easier.

After the unit is installed, it is necessary to flush the unit thoroughly. Do this at the nearest water faucet (such as a utility sink or outdoor faucet) and run cold water only. The water may be blackish in color for some time because of the carbon cartridge - this is normal carbon dust. Continue to run water until it runs clear. Shut the water off and let the unit sit for a while, then flush it again. The homeowner may notice an initial "cloudy" appearance to the water for a day or so - this cloudiness is actually tiny air bubbles being purged from the carbon. This is normal, harmless, and will clear up in a day or two.

IMPORTANT OPERATING NOTES
Maximum water pressure is 100 PSI. Install a pressure regulator on water with pressure higher than this. Maximum operating temperature is 110ƒ F. Protect from freezing.

 

Filtration Information:

The PurHome WH-100 whole house water treatment system features a washable, pleated 5 micron sediment filter with a clear housing for easy viewing. Filter cartridge may be cleaned and re-used several times before needing replacement. It filters sand, sediment, silt and other suspended matter in water.

In the second stage, water passes through a 10 micron 20" long carbon block cartridge specifically designed to remove chlorine over 99%, chemical contaminants (VOCs) and cancerous chlorine by-products like THMs, odors and more. A 0.5 micron carbon block cartridge is an additional option which will also remove cysts such as cryptosporidium and giardia. The carbon cartridge is recommended to be replaced on average every 6 months.

 

Specifications:

Connection:     3/4" FPT
Dimensions:     16" l x 24" h x 6" d
Flow rate:     8 GPM (10 mic), 5 GPM (0.5 mic)

 

Installation Instructions

Warranty Information

Warranty: 5 Years

6 Month Satisfaction Guarantee
Write your own product review

Product Reviews

  1. Simple and easy 5 Star Review

    Posted by on 16th Jun 2011

    This setup is great for its intended use. I installed one on my house 2 yrs ago and have had nothing but great results. It got rid of that nasty chlorine taste and also rid me of the line sediment that is found in many city systems. Thanx Puriteam!!


Customers Who Viewed This Product Also Viewed

Ask about our payment plan Ask our experts
Get Free Shipping on all orders over $99.00
  • Help Me Choose >