Clicky

  Loading... Please wait...

Categories

Categories

Recently Viewed

  • pH Water Neutralizer

pH Acid Neutralizing Filter

RRP:
$1,195.00
Your Price:
$849.00 (You save $346.00)
SKU:
pH-ANF
Brand:
Weight:
220.00 LBS
Quantity:


Product Description

Highlights

  • Raises pH to Neutral Level Using Minerals
  • Self-Cleaning, Easy to Program Valve
  • Comes with a Port Hole For Easy Filling

 

Blue-Green Stains?  Get It Fixed Today with a pH Water Filter and Acid Neutralizerblue green stains.jpg


Acidic water
can leach unhealthy levels of copper from pipes and cause greenish-blue stains on fixtures. It can cause many other corrosion problems as well and drastically shorten the life of all water using equipment including dishwashers, washing machines, hot water heaters as well as fixtures.

When acid pH water (below 6.7) is passed through the filter, calcium carbonate (Calcite) is slowly dissolved into the water, increasing the pH to a neutral level. An automatic backwashing cleans the bed and prevents compaction. For pH levels below 6.0 but higher than 5.7, the addition of a media called Corosex (magnesium oxide) is needed to assist in the neutralization. You will need to add some Calcite (and Corosex if used) about once per year, depending on water usage. If your pH level is below 5.7 you will need a Soda Ash Injection system. Please call for a recommendation.

Tank has an EZ load port to add additional media. No need to remove control valve!

PuriTeam Acid Neutralizers use the Fleck ProFlowSE 5000 Control Valve.

FLECK ProFlowSE 5-CYCLE pH WATER FILTER AND ACID NEUTRALIZER FEATURES:
*  Fully automatic and programmable backwash/rinse/purge cycles
*  Home-owner friendly design
*  No moving parts in water
*  By-pass valve included
*  5 year warranty on valve
*  Tank is ABS lined, with fiberglass wrap - 10 year warranty
*  The PH water filter is easy to install!


Need help choosing the right pH water filter system for your situation?  Get Your Custom Recommendation Now.

 

FEATURES:

*  Fully automatic and programmable backwash/rinse/purge cycles

*  Home-owner friendly design

*  No moving parts in water

*  By-pass valve included

*  5 year warranty on valve

*  Tank is ABS lined, with fiberglass wrap - 10 year warranty

*  Easy to install!

 

FAQ's:

Q: Does this acid neutralizer system go before or after other treatment systems including iron, sulfur, or manganese removal systems?

A: This acid neutralizer system will go first. It is imperative that you raise your pH level prior to other filtration.


Q: Can this filter be plumbed before my pressure tank?

A: No, you will need to plumb this system on your main water line after your pressure tank.


Q: How often will this system backwash?
    
A: The factory will pre-program the valve to backwash every three days.

 
Q:  How often will I need to add media?

A: Because the media bonds to the water the level depletes over time; you will need to add media on average once a year.

 
Q: Will I need to hire a Plumber to add the media?

A: No, the tank will have a port hole on the side for easy filling. The valve will not need to be removed for this process.

 

pH Water Filter Information:

When acid pH water (below 6.7) is passed through the filter, calcium carbonate (Calcite) is slowly dissolved into the water, increasing the pH to a neutral level. An automatic backwashing cleans the bed and prevents compaction.

For pH levels is below 6.1 but higher than 5.7, the addition of a media called Corosex (magnesium oxide) is needed to assist in the neutralization. You will need to add some Calcite (and Corosex if used) about once per year, depending on water usage.

Very Important: If your pH level is below 5.7 you will need a Soda Ash Injection system. Please call for a recommendation.

Specifications:

8-10 GPM System
Tank size:     10" diameter, 54" high (1-1/2 cu. ft.)
Valve:             Fleck ProFlowSE, 7" high
Flow rate:      8-10 GPM
Fittings:         3/4" or 1" MPT, Copper or PVC - you specify 
Calcite (for pH above 6.1)     $849.00
OR Calcite & Corosex (for pH 6.1 and below)     $899.00


10-12 GPM System
Tank size:     13" diameter, 54" high (2-1/2 cu. ft.)
Valve:     Fleck ProFlow SE, 7" high
Flow rate:     10-12 GPM
Fittings:     3/4" or 1" MPT, Copper or PVC - you specify
Calcite (for pH above 6.1)     $999.00
Calcite & Corosex (for pH 6.1 and below)     $1,049.00

 

Warranty Information

Warranty: 5 Years Components

Tank: 10 year warranty
Write your own product review

Product Reviews

  1. Works for me.. 4 Star Review

    Posted by on 6th Feb 2017

    Unit went in well-slight issue with the bypass manifold-I would of liked to see a better support and clamp for it-had it up and going in a few hours-I like the results so far.


  2. easy start up 4 Star Review

    Posted by on 15th Nov 2012

    had it up and running in a couple hrs. like bypass valve built into system. setting up programming was fairly simple, step by step instruction. ph is were it should be now.


Customers Who Viewed This Product Also Viewed

Ask about our payment plan Ask our experts
Get Free Shipping on all orders over $99.00
  • Help Me Choose >