Free Shipping on Orders over $60 and 6-Month Satisfaction Guarantee

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Duis quis ligula risus, in volutpat felis. Donec pellentesque estor convallis nibh vel vulputate. In aliquet urna quis lacus rhoncus in fringilla dolor tempor. Sed sodales nisl sem. Mauris eu tellus ipsum.

PurHome Arsenic Removal System
Click to View Certifications
Click Here for Certifications

PurHome Arsenic Removal System
ASM

Highlights


  • Arsenic Removal Only
  • Can be used for both well and city water applications
  • Maintenance-free self cleaning system
List Price: $2,400.00 Price Starting At: $1,599.00 Free Shipping Savings: $801.00 (33.38 %)
Select Plumbing Size:  

Choose Gal/Min Rating:  

   Add to Cart
The PurHome Arsenic removal system is designed to remove Arsenic at the whole house level. This is a self cleaning system that comes with a factory programmed control valve that is set to flush once a week.

This system uses a strong based hybrid anion exchange resin called ASM-10-HP specifically formulated to selectively remove arsenic. This is a back washing system that will automatically flush itself several times a week.

Features and Benefits

- Highest arsenic removal capacity of organic based arsenic removal media

- NSF/ANSI 61 Certified for Material Safety

- Effective across the entire potable water pH range

- Superior physical stability - Spherical uniform particle size provide low pressure drop and greater resistance to bed compaction. Unlike granular, coated medias, ASM10-HP will not she particles 

Features and Benefits

- Highest arsenic removal capacity of organic based arsenic removal media

- NSF/ANSI 61 Certified for Material Safety

- Effective across the entire potable water pH range

- Superior physical stability - Spherical uniform particle size provide low pressure drop and greater resistance to bed compaction. Unlike granular, coated medias, ASM10-HP will not shed particles

- Vortech tank design lifts media above the bottom filter cone for better filtration and back washing with less water
Q: Where does this system get installed?

A: This system will need to be installed on your main water line after your pressure tank but before the hot water break.

Q: How long will the ASM-10-HP media last?

A: The ASM-10-HP media will last two years on average. With a higher level of Arsenic you may get one year and with a low level you may get three years. It is recommended that you test your Arsenic level after one year and then every six months after that.

Q: Will this system remove other contaminates iron or sulfur?

A: No, this media is specifically resigned for Arsenic removal. We have specialized systems for iron, sulfur, and manganese removal. Having multiple contaminate issues may require multiple treatment systems. Please contact us toll free @ 888-491-4100 if you are dealing with multiple issues and need assistance in the selection process, we are here to help!

Q: Can I use this system if my pH level is low?


A: Yes, this Arsenic removal resin can be used with a pH as low as 5.5.

Arsenic is a known carcinogen, increasing the risk of cancer even at very low concentrations. Arsenic occurs naturally in many groundwaters throughout the USA, less commonly in surface waters. With the recent passage of new limits restricting arsenic levels in potable water, many public water supplies require arsenic reduction prior to use.

Although there are many treatment technologies available for arsenic reduction, one of the simplest methods is to use an arsenic selective adsorbent media. This type of system is well suited for residential systems as well as larger commercial and municipal systems, requiring little or no maintenance and only periodic monitoring.

This unique media is an arsenic selective adsorbent resin hybrid, ASM-10-HP that is ideal for pump and treat installations. This product is much faster kinetically than other adsorbents and will remove pentavalent arsenic to well below the current EPA standard for many thousands of bed volumes before exhaustion. This product can be regenerated and re-used or can be disposed of as non-hazardous waste, in most cases.

It is specially prepared to be taste and odor free. It is also dust free, does not require respirators or other protective devices while handling and requires no rinsing or backwashing prior to use. ASM-10-HP is WQA certified to meet the ANSI/NSF 61 standard for potable water.


 

 




Suggested Operating Conditions

System uses a standard 110volt plug
Temperature - 170F max
Pressure loss - 25 psi max
pH level - 5.5 to 9.5

Sizes & Specs

ARS - 10 gpm
Fleck ProFlo valve
Tank Size - 10" x 44"
Price: $1,599.00

ARS - 12 gpm
Fleck ProFlo valve
Tank Size - 12" X 48"
Price: $2,599.00

* If you are not sure which size to order it is recommended that you conduct a flow rate test. Following are some instruction on how to calculate your flow rate:

Calculating Your Flow Rate
You will need a watch with a second hand and a 1 or 5 gallon container to measure your flow rate with the instructions below.

  1. Use an outside faucet spigot or inside use a bathtub as the measuring point (if using a bathtub, open BOTH the hot and cold water faucets). Open the faucet completely.
  2. Wait until the pump kicks on, then go to step 3.
  3. Place either a 1 or 5 gallon container under the faucet and measure the amount of time it takes to fill the container in seconds. A 5 gallon bucket works best because it will be the most accurate.
  4. Refer to the chart below. Find the row on the left that contains the size of the container you used to fill with water, either 1 or 5 gallons.
  5. Then, find the column across the top that is closest to the number of seconds in took to fill the container.
  6. The value in the table where the row and column meet is your flow rate in gallons per minute.

Seconds to Fill Container

5

10

15

20

25

30

35

40

50

60

75

1 gallon bucket

12.00

6.00

4.00

--

--

--

--

--

--

--

--

5 gallon bucket

--

30.00

20.00

15.00

12.00

10.00

8.5

7.5

 

6.00

5.00

4.00

Warranty:  10 Years Tank and 5 Years on Components.

6 Month Satisfaction Guarantee
Important Links
Arsenic Removal Installation Instructions

See How It Works

The Purhome Arsenic removal system is designed to remove Arsenic at the whole house level and can be used on both private well and city water applications.

This system uses a strong based hybrid anion exchange resin called ASM-10-HP specifically formulated to selectively remove arsenic.

Features and Benefits

- Highest arsenic removal capacity of organic based arsenic removal media

- NSF/ANSI 61 Certified for Material Safety

- Effective across the entire potable water pH range

- Superior physical stability - Spherical uniform particle size provide low pressure drop and greater resistance to bed compaction.

Related Products


I Have   
 
  • Help Me Choose
  • Free Water Analysis
  •  
©Copyright 1998 - 2010